For best Z77 Extreme4 Motherboard performance use the maximum amount of 32GB, fill all the slots with the max allowed memory per slot for your Motherboard. What is the warranty on these memory? What if the memory is not compatible? Let's take a look at this mainstream socket 1155 motherboard from ASRock based on the forthcoming Intel Z77 chipset, targeted to 'Ivy Bridge' processors. So I'm planning on getting the ASRock Z77 Extreme4. My questions are: 1. This is pretty self-explanatory but I still want confirmation. This means it can ONLY fit 4 RAMs that are 240 pin? Do I have to fill all 4 slots or is it not necessary? Download zynga poker texas holdem mod apk no human. It says Maximum Memory Supported: 32GB. So this means the maximum amount of RAM it can support is 32gb. Would it harm the.
Hello Everyone,
Guess I'll start with..I've purchased the Z77 Extreme4 on 11/28/2013 and 4 G.SKILL Ripjaws X Series (F3-17000CL9D) along with various other components.
Recently, I've upgraded my GPU to the EVGA GeForce GTX 980 Ti 6GB HYBRID up from the GeForce GTX 660 2GB. Before the install, I was registering 16GBytes of the G.SKILL Ripjaws X Series, now my Geforce Experience and System are only showing 8GBytes of installed memory.
I've gone into my Bios and noticed it shows there as well 'Total Memory 8192MB'. Also that DDR3_A1 and B1 show ':NONE'. In 'System Browser' it shows all 4 sticks registered though. Also in CPUID, it shows 16GBytes registered.
All actions taken thus far..
- Before opening my tower and handling the memory sticks, I utilized Windows' built-in memory diagnostic tool to check my RAM ?嚙練dsched.exe?? No issues detected.
- Removed all ram sticks and inserted, one at a time, each mem stick into each slot on the mobo, beginning with slot 1 and moving over to the adjacent slot with each power cycle. I've done this with each stick individually. No boot errors with any stick in any slot.
My UEFI Version is P2.90
My current rig setup.. If you don't mind me copying and pasting.
- ASRock Z77 Extreme4 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
- G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000)
- EVGA GeForce GTX 980 Ti 6GB HYBRID
- Seagate Desktop HDD ST1000DM003 1TB 64MB Cache SATA 6.0Gb/s 3.5' Internal Hard Drive
- SAMSUNG 840 EVO MZ-7TE120BW 2.5' 120GB SATA III TLC Internal Solid State Drive
- Intel Core i5-3570K Ivy Bridge Quad-Core 3.4GHz (3.8GHz Turbo) LGA 1155 77W BX80637I53570K Desktop Processor Intel HD Graphics 4000
- Cooler Master Hyper 212 EVO - CPU Cooler with 120 mm PWM Fan
- CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply
- Windows 10 Home 64-bit
No over-clocking or alternate tuning have been made on this system. Simple plug and play.
I'd like to thank everyone for stopping by to read my ramblings regarding my issue. Any input would be appreciated. If needing any further details, don't hesitate to ask.
Thank you,
..Jason
Edited by FS_OK - 02 Mar 2016 at 2:57pm
Guess I'll start with..I've purchased the Z77 Extreme4 on 11/28/2013 and 4 G.SKILL Ripjaws X Series (F3-17000CL9D) along with various other components.
Recently, I've upgraded my GPU to the EVGA GeForce GTX 980 Ti 6GB HYBRID up from the GeForce GTX 660 2GB. Before the install, I was registering 16GBytes of the G.SKILL Ripjaws X Series, now my Geforce Experience and System are only showing 8GBytes of installed memory.
I've gone into my Bios and noticed it shows there as well 'Total Memory 8192MB'. Also that DDR3_A1 and B1 show ':NONE'. In 'System Browser' it shows all 4 sticks registered though. Also in CPUID, it shows 16GBytes registered.
All actions taken thus far..
- Before opening my tower and handling the memory sticks, I utilized Windows' built-in memory diagnostic tool to check my RAM ?嚙練dsched.exe?? No issues detected.
- Removed all ram sticks and inserted, one at a time, each mem stick into each slot on the mobo, beginning with slot 1 and moving over to the adjacent slot with each power cycle. I've done this with each stick individually. No boot errors with any stick in any slot.
My UEFI Version is P2.90
My current rig setup.. If you don't mind me copying and pasting.
- ASRock Z77 Extreme4 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
- G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000)
- EVGA GeForce GTX 980 Ti 6GB HYBRID
- Seagate Desktop HDD ST1000DM003 1TB 64MB Cache SATA 6.0Gb/s 3.5' Internal Hard Drive
- SAMSUNG 840 EVO MZ-7TE120BW 2.5' 120GB SATA III TLC Internal Solid State Drive
- Intel Core i5-3570K Ivy Bridge Quad-Core 3.4GHz (3.8GHz Turbo) LGA 1155 77W BX80637I53570K Desktop Processor Intel HD Graphics 4000
- Cooler Master Hyper 212 EVO - CPU Cooler with 120 mm PWM Fan
- CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply
- Windows 10 Home 64-bit
No over-clocking or alternate tuning have been made on this system. Simple plug and play.
I'd like to thank everyone for stopping by to read my ramblings regarding my issue. Any input would be appreciated. If needing any further details, don't hesitate to ask.
Thank you,
..Jason
Edited by FS_OK - 02 Mar 2016 at 2:57pm
For best Z77 Extreme4 Motherboard performance use the maximum amount of 32GB, fill all the slots with the max allowed memory per slot for your Motherboard. What is the warranty on these memory? What if the memory is not compatible? Let's take a look at this mainstream socket 1155 motherboard from ASRock based on the forthcoming Intel Z77 chipset, targeted to 'Ivy Bridge' processors. So I'm planning on getting the ASRock Z77 Extreme4. My questions are: 1. This is pretty self-explanatory but I still want confirmation. This means it can ONLY fit 4 RAMs that are 240 pin? Do I have to fill all 4 slots or is it not necessary? Download zynga poker texas holdem mod apk no human. It says Maximum Memory Supported: 32GB. So this means the maximum amount of RAM it can support is 32gb. Would it harm the.
Hello Everyone,
Guess I'll start with..I've purchased the Z77 Extreme4 on 11/28/2013 and 4 G.SKILL Ripjaws X Series (F3-17000CL9D) along with various other components.
Recently, I've upgraded my GPU to the EVGA GeForce GTX 980 Ti 6GB HYBRID up from the GeForce GTX 660 2GB. Before the install, I was registering 16GBytes of the G.SKILL Ripjaws X Series, now my Geforce Experience and System are only showing 8GBytes of installed memory.
I've gone into my Bios and noticed it shows there as well 'Total Memory 8192MB'. Also that DDR3_A1 and B1 show ':NONE'. In 'System Browser' it shows all 4 sticks registered though. Also in CPUID, it shows 16GBytes registered.
All actions taken thus far..
- Before opening my tower and handling the memory sticks, I utilized Windows' built-in memory diagnostic tool to check my RAM ?嚙練dsched.exe?? No issues detected.
- Removed all ram sticks and inserted, one at a time, each mem stick into each slot on the mobo, beginning with slot 1 and moving over to the adjacent slot with each power cycle. I've done this with each stick individually. No boot errors with any stick in any slot.
My UEFI Version is P2.90
My current rig setup.. If you don't mind me copying and pasting.
- ASRock Z77 Extreme4 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
- G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000)
- EVGA GeForce GTX 980 Ti 6GB HYBRID
- Seagate Desktop HDD ST1000DM003 1TB 64MB Cache SATA 6.0Gb/s 3.5' Internal Hard Drive
- SAMSUNG 840 EVO MZ-7TE120BW 2.5' 120GB SATA III TLC Internal Solid State Drive
- Intel Core i5-3570K Ivy Bridge Quad-Core 3.4GHz (3.8GHz Turbo) LGA 1155 77W BX80637I53570K Desktop Processor Intel HD Graphics 4000
- Cooler Master Hyper 212 EVO - CPU Cooler with 120 mm PWM Fan
- CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply
- Windows 10 Home 64-bit
No over-clocking or alternate tuning have been made on this system. Simple plug and play.
I'd like to thank everyone for stopping by to read my ramblings regarding my issue. Any input would be appreciated. If needing any further details, don't hesitate to ask.
Thank you,
..Jason
Edited by FS_OK - 02 Mar 2016 at 2:57pm
Guess I'll start with..I've purchased the Z77 Extreme4 on 11/28/2013 and 4 G.SKILL Ripjaws X Series (F3-17000CL9D) along with various other components.
Recently, I've upgraded my GPU to the EVGA GeForce GTX 980 Ti 6GB HYBRID up from the GeForce GTX 660 2GB. Before the install, I was registering 16GBytes of the G.SKILL Ripjaws X Series, now my Geforce Experience and System are only showing 8GBytes of installed memory.
I've gone into my Bios and noticed it shows there as well 'Total Memory 8192MB'. Also that DDR3_A1 and B1 show ':NONE'. In 'System Browser' it shows all 4 sticks registered though. Also in CPUID, it shows 16GBytes registered.
All actions taken thus far..
- Before opening my tower and handling the memory sticks, I utilized Windows' built-in memory diagnostic tool to check my RAM ?嚙練dsched.exe?? No issues detected.
- Removed all ram sticks and inserted, one at a time, each mem stick into each slot on the mobo, beginning with slot 1 and moving over to the adjacent slot with each power cycle. I've done this with each stick individually. No boot errors with any stick in any slot.
My UEFI Version is P2.90
My current rig setup.. If you don't mind me copying and pasting.
- ASRock Z77 Extreme4 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
- G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000)
- EVGA GeForce GTX 980 Ti 6GB HYBRID
- Seagate Desktop HDD ST1000DM003 1TB 64MB Cache SATA 6.0Gb/s 3.5' Internal Hard Drive
- SAMSUNG 840 EVO MZ-7TE120BW 2.5' 120GB SATA III TLC Internal Solid State Drive
- Intel Core i5-3570K Ivy Bridge Quad-Core 3.4GHz (3.8GHz Turbo) LGA 1155 77W BX80637I53570K Desktop Processor Intel HD Graphics 4000
- Cooler Master Hyper 212 EVO - CPU Cooler with 120 mm PWM Fan
- CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply
- Windows 10 Home 64-bit
No over-clocking or alternate tuning have been made on this system. Simple plug and play.
I'd like to thank everyone for stopping by to read my ramblings regarding my issue. Any input would be appreciated. If needing any further details, don't hesitate to ask.
Thank you,
..Jason
Edited by FS_OK - 02 Mar 2016 at 2:57pm
Asrock Z77 Extreme4 Ram Slots Download
- - Supports 3rd and 2nd Generation Intel® Core™ i7 / i5 / i3 / Xeon® / Pentium® / Celeron® in LGA1155 Package
- Digi Power Design
- 8 + 4 Power Phase Design
- Supports Intel® Turbo Boost 2.0 Technology
- Supports Intel® K-Series unlocked CPU
- Supports Hyper-Threading Technology - - Intel® Z77
- Supports Intel® Rapid Start Technology and Smart Connect Technology*Intel® Rapid Start Technology and Smart Connect Technology are only supported under Windows® 7 OS or later versions. - - Dual Channel DDR3 memory technology
- 4 x DDR3 DIMM slots
- Supports DDR3 2800+(OC)/2400(OC)/2133(OC)/1866(OC)/1600/1333/1066 non-ECC, un-buffered memory
- Max. capacity of system memory: 32GB*
- Supports Intel® Extreme Memory Profile (XMP) 1.3 / 1.2*Az operációs rendszer korlátai miatt a tényleges memóriaméret kevesebb lehet 4 GB-nál, mert a rendszer 32 bites Windows® operációs rendszer alatt saját használatra fenntartja egy részét. For Windows® 64-bit OS with 64-bit CPU, there is no such limitation.
**In order to maximize the system memory, please install 8GB memory module with 16 cells - - 64Mb AMI UEFI Legal BIOS with GUI support
- Supports 'Plug and Play'
- ACPI 1.1 Compliance Wake Up Events
- Supports jumperfree
- SMBIOS 2.3.1 Support
- CPU Core, IGPU, DRAM, 1.8V PLL, VTT, VCCSA Voltage Multi-adjustment - - Supports Intel® HD Graphics Built-in Visuals : Intel® Quick Sync Video 2.0, Intel® InTru™ 3D, Intel® Clear Video HD Technology, Intel® Insider™, Intel® HD Graphics 2500/4000 with Intel® Ivy Bridge CPU
- Supports Intel® HD Graphics Built-in Visuals : Intel® Quick Sync Video, Intel® InTru™ 3D, Intel® Clear Video HD Technology, Intel® HD Graphics 2000/3000, Intel® Advanced Vector Extensions (AVX) with Intel® Sandy Bridge CPU
- Pixel Shader 5.0, DirectX 11 with Intel® Ivy Bridge CPU. Pixel Shader 4.1, DirectX 10.1 with Intel® Sandy Bridge CPU
- Max. shared memory 1760MB with Intel® Ivy Bridge CPU. Max. shared memory 1759MB with Intel® Sandy Bridge CPU
- Three graphics output options: D-Sub, DVI-D and HDMI
- Supports HDMI Technology with max. resolution up to 1920x1200 @ 60Hz
- Supports DVI with max. resolution up to 1920x1200 @ 60Hz
- Supports D-Sub with max. resolution up to 2048x1536 @ 75Hz
- Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and HBR (High Bit Rate Audio) with HDMI (Compliant HDMI monitor is required)
- Supports HDCP function with DVI and HDMI ports
- Supports Full HD 1080p Blu-ray (BD) / HD-DVD playback with DVI and HDMI ports*Az Intel® HD Graphics Built-in Visuals és VGA támogatása csak beépített GPU-val rendelkező processzorok esetében lehetséges.
**Due to chipset limitation, the Blu-ray playback of Intel® HD Graphics is only supported under Windows® Vista™ and Windows® 7.
***Intel® InTru™ 3D is only supported under Windows® 7 and Windows® 7 x64. - - 7.1 CH HD Audio with Content Protection (Realtek ALC898 Audio Codec)
- Premium Blu-ray audio support - - PCIE x1 Gigabit LAN 10/100/1000 Mb/s
- Broadcom BCM57781
- Supports Wake-On-LAN
- Supports Energy Efficient Ethernet 802.3az
- Supports PXE - - 2 x PCI Express 3.0 x16 slots (PCIE2/PCIE3: single at x16 (PCIE2) / x8 (PCIE3) or dual at x8/x8 mode)
- 2 x PCI Express 2.0 x1 slots
- 2 x PCI slots
- Supports AMD Quad CrossFireX™ and CrossFireX™
- Supports NVIDIA® Quad SLI™ and SLI™*Az Intel® Core™ i5 és Core™ i7. generációs Intel® CPU-k támogatják a 3. gen. PCIe technológiát. - - 2 x SATA3 6.0 Gb/s connectors by Intel® Z77, support RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel® Rapid Storage and Intel® Smart Response Technology), NCQ, AHCI and Hot Plug functions
- 2 x SATA3 6.0 Gb/s connectors by ASMedia ASM1061, support NCQ, AHCI and Hot Plug functions (SATA3_A1 connector is shared with eSATA3 port) - - 2 x Rear USB 3.1 Gen1 ports by Intel® Z77, support USB 1.0/2.0/3.0 up to 5Gb/s
- 2 x Rear USB 3.1 Gen1 ports by ASMedia ASM1042, support USB 1.0/2.0/3.0 up to 5Gb/s
- 1 x Front USB 3.1 Gen1 header by Intel® Z77 (supports 2 USB 3.1 Gen1 ports), supports USB 1.0/2.0/3.0 up to 5Gb/s - - 4 x SATA2 3.0 Gb/s connectors, support RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel® Rapid Storage and Intel® Smart Response Technology), NCQ, AHCI and Hot Plug functions
- 4 x SATA3 6.0 Gb/s connectors
- 1 x IR header
- 1 x CIR header
- 1 x COM port header
- 1 x HDMI_SPDIF header
- 1 x Power LED header
- 2 x CPU Fan connectors (1 x 4-pin, 1 x 3-pin)
- 3 x Chassis Fan connectors (1 x 4-pin, 2 x 3-pin)
- 1 x Power Fan connector (3-pin)
- 24 pin ATX power connector
- 8 pin 12V power connector
- Front panel audio connector
- 3 x USB 2.0 headers (support 6 USB 2.0 ports)
- 1 x USB 3.1 Gen1 header (supports 2 USB 3.1 Gen1 ports)
- 1 x Dr. Debug with LED*
- 1 x Power Switch with LED
- 1 x Reset Switch with LED
- 1 x Clear CMOS Switch with LED - Hátsó panel I/OI/O Panel
- 1 x PS/2 Keyboard/Mouse Port
- 1 x D-Sub Port
- 1 x DVI-D Port
- 1 x HDMI Port
- 1 x Optical SPDIF Out Port
- 2 x Ready-to-Use USB 2.0 Ports
- 1 x eSATA3 Connector
- 4 x Ready-to-Use USB 3.1 Gen1 Ports
- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)
- 1 x Clear CMOS Switch with LED
- HD Audio Jack: Rear Speaker / Central / Bass / Line in / Front Speaker / Microphone - - ASRock Extreme Tuning Utility (AXTU)
- ASRock Instant Boot
- ASRock Instant Flash
- ASRock APP Charger
- ASRock XFast USB
- ASRock XFast LAN
- ASRock XFast RAM
- ASRock Crashless BIOS
- ASRock OMG (Online Management Guard)
- ASRock Internet Flash
- ASRock Dehumidifier Function
- ASRock No-K OC Technology
- Lucid Virtu Universal MVP
- Hybrid Booster:
- CPU Frequency Stepless Control
- ASRock U-COP
- Boot Failure Guard (B.F.G.)
- Combo Cooler Option (C.C.O.)
- Good Night LED*Lucid Virtu Universal MVP támogatás csak integrált GPU-val rendelkező processzorok használata esetén lehetséges.
**LucidLogix Virtu MVP only supports Windows® 7 or Windows® 8. - - Drivers, Utilities, AntiVirus Software (Trial Version), CyberLink MediaEspresso 6.5 Trial, ASRock MAGIX Multimedia Suite - Trial
- - 1 x ASRock SLI_Bridge_2S Card
- Quick Installation Guide, Support CD, I/O Shield
- 2 x SATA Data Cables - - CPU Temperature Sensing
- Chassis Temperature Sensing
- CPU, Chassis, Power Fan Tachometer
- CPU, Chassis Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by CPU Temperature)
- CPU, Chassis Fan multi-speed control
- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore - - ATX Form Factor: 12.0-in x 8.6-in, 30.5 cm x 21.8 cm
- Premium Gold Capacitor design (100% Japan made high quality conductive polymer capacitors) - - Microsoft® Windows® 8.1 32-bit / 8.1 64-bit / 8 32-bit / 8 64-bit / 7 32-bit / 7 64-bit / Vista™ 32-bit / Vista™ 64-bit / XP 32-bit / XP 64-bit*Windows® 8.1 támogatás az Intel® Ivy Bridge CPU integrált VGA vezérlőjével.
- - FCC, CE
- ErP/EuP Ready (ErP/EuP ready power supply is required)
Asrock Z77 Extreme4 Ram Slots Not Working
- This motherboard unlocks maximum memory performance, coming with four DIMM slots for dual-channel memory, supporting up to DDR3 2800+MHz! Next-Gen PCI-E 3.0 Support This ASRock motherboard supports the Next-Gen PCI-E 3.0!
- With that I was advised to also upgrade the Memory RAM to a faster one. Thus I am considering to replace my existing 16 GB (2 x 8GB) G.Skill Sniper DDR3-1600 CL9-9-9-24 (F3-1600C9D-16GSR) Memory RAMs with 2400 MHz version. I would like to know what are the compatible G.Skill memory sticks.
